ESCAM QF260 WiFi Solar Camera

Described on Banggood’s website as the ESCAM QF260 WIFI HD 1080P 2.0MP Wireless IP67 Outdoor Solar Battery Power Low Power Consumption PIR Surveillance Security Camera, this looks remarkably like my original YN88-WIFI-130W described here. Well, THIS new WiFi cameraalso has the term “Watchmen” on the box but is a later model using a newer App.

The QF260 comes complete with two bright white LEDs and 2infra-red LEDs as you can see on the photo above.

I set the camera and App up a while ago then forgot how I did it. Today after failing to get anywhere due to the camera having sat inside in a dark corner for weeks on end, I eventually took the plunge and opened the manual (I know, a sign of weakness). The camera comes with a USB charging lead for times like this and within minutes there were lights flashing on the front of the QF260 at which point I started up the MyCam App on my Android phone. Clearly I originally set the camera to work with my WiFi but of course it can also be it’s own access point.

Having already set up the phone by voice, there was nothing to do but watch the camera (which I’d named NewEscam) display clear video on the App. Within 15 minutes or less, the battery indicator in the APP was showing (a somewhat optimistic as it turns out) 40%, clearly referring to the camera as my phone was down to 33%. I disconnected the charge lead and was left with the camera showing a constant blue LED and a dim warm white LED which went on and off depending on any charge coming in through my office lighting (so now I knew what the dim white light was for). Why am I using stock images and not my own? It is midnight and I’m still waiting for my studio lighting to arrive.

I noted that in “BASIC SETTINGS” in the App, “Indicator light” was turned on. I could turn that off if I was desperate to save power but I left it on. Thats the blue light I referred to earlier.

The App has 3 tabs – “Home”, “News” and “My”. Somewhat annoyingly, despite mostly all else being in English, under “My”, the option to “detect new version” of the App, when selected, brought up a Chinese dialog box, as did “terms of service” and “privacy protocol”. Why? The help section, thankfully came up in English. In the help section itself are 6 options and the last one is titled “die-net video”. I can only assume the writer is of Chinese/German origin as the title of that section, while the content is readable, is itself nonsense.

However, the camera works. Video and still recordings work a treat and before long my phone was full of short test videos and images.

You will of course see ads claiming 1920*1080px but I’d take that with a pimch of salt – actual picture quality depends on WiFi signal strength like all similar cameras and is better when there is little or no movement. As for IP67 certification, I tend to ignore claims like that in favour of actual experience – my other ESCAM camera has shown absolutely no signs of water ingress or rust after several months of outdoor use (not in the slightest sheltered) including this winter (some rain, a little snow but not to be confused with the UK) during which time it has functioned perfectly. I’m hoping for the same results with the QF260.

In the dark, putting my hand over what had been a pale white charging light showed a clear green LED, meant to indicate knowledge of movement.

I decided at this point to give up for the night and let the phone and the camera get a good charge (this week there will be no sun at all, meanwhile, two existing solar lights including my other “Watchmen” branded solar camera, are running fine on solar only as they have been for several months despite the odd sun-free day here in Andalucia).

Once the internal battery has some charge, the lights work, I noted the bright white internal floods come on momentarily but again from the manual it is not instantly obvious who to get them to come on. However as I was writing this and updating another blog entry, the camera was sitting on my desk next to my arm and after a while the white lights came on and stayed on for a couple of minutes, so again, nothing wrong with the camera, just somewhat lousy documentation.

The ads clearly state motion detection as well as night vision but the documentation on this needs some work.

Finally despite apparently lack of support on the ESCAM site for the camera, I realised that if I made it utterly dark in my room – and moved – the camera floodlights came on (there is a selector button inside to select IR lights or white lights). Magic. I’ve written to ESCAM to ask if they can improve the documentation.

http://www.escam.cn/support/download-en.html

Facebooktwitterpinterestlinkedin

Latest posts