This Recreation Boy is like no different – there have been a couple of variations on the market which have been hacked – this one is just a bit bit particular.
So that is no extraordinary Recreation Boy and has some completely superb options. The factor that makes it stand out probably the most is the unique Recreation Boy cart that has been tailored right into a SD card reader to behave as a customized Recreation Boy cart with SD Energy with Retro Pi!
So you’ve got emulation station operating as a high emulator – you possibly can obtain so many video games and techniques right here – Recreation Boy Superior to MAME so you possibly can fireplace up arcade video games too. All you retro gaming choices are right here. Simply think about enjoying Recreation Gear or Atari Lynx video games on this too! All safely saved on the lovable customized Raspberry Pi cart. We would like one!
Here’s a listing of components used – textual content taken from Wermy submit on Youtube.
You possibly can observe him right here: WERMY YOUTUBE
3.5” composite show: https://www.adafruit.com/merchandise/913
A phrase of recommendation on these composite screens: make the wire connecting it to your Pi as brief as attainable to cut back noise. Including some shielding helps too. You may get them cheaper elsewhere, particularly in case you rip one out of a backup digital camera system on ebay or one thing, however the Adafruit one is properly documented, straightforward to transform to run on 5v, and I knew the dimensions of the controller board and display screen housing earlier than shopping for, in order that was good.
Micro USB breakout for charging port: https://www.sparkfun.com/merchandise/12035
2000mAh LiPo battery: https://www.adafruit.com/merchandise/2011
There may be really slightly extra room in there, so I’ll probably improve this to the 2500mAh battery adafruit carries.
Lipo charging board: https://www.adafruit.com/merchandise/2465
Audio amplifier: https://www.adafruit.com/merchandise/2130
Sounds fairly good and suits properly inside the unique speaker spot
Teensy LC: http://www.amazon.com/PJRC-Teensy-LC/…
Used this to wire up the controls and have them present up as a USB keyboard in Emulationstation. You may use GPIO for the buttons if you need, however I needed a Teensy so as to add some multicolor standing LEDs afterward down the highway anyway. Plus it makes it simpler to improve the Pi Zero sooner or later if they arrive out with a Pi Zero 2 or one thing.